+919814154321 Research Facility Developed
- Research Facility for Experimental Evaluation of Magneto-rheological Brake
- Research Facility for Analysis of Suspension with Variable Stiffness and Variable Damping Force for Automotive Applications.
- Research Facility for Experimental Analysis of Fluid Elastic Vibrations in Finned Heat Exchanger Tube Arrays subjected to Water and Air-Water Cross Flows.
- Research Facility for Experimental Investigation of Torsional Strength of Automotive Drive Shaft.
Funded Projects
Sponsored Research 2018-19
| Sr. No | Title of Project | PI/Co-PI | Amount (Rs) | Funding Agency |
| 1 | Experimental Evaluation of Magnetorheological Clutch | Dr. S. R. Patil | 20,000.00 | RIT, Sakharale |
| 2 | Design of regenerative shock absorber along with mechanical motion rectifier | Dr. L. M. Jugulkar | 25,000.00 | RIT, Sakharale |
| 3 | Experimental investigation to study the effect of fin density and fin thickness on fluid elastic instability threshold of normal square finned tube arrays in water cross flow | Dr. S. R. Desai | 30,000.00 | RIT, Sakharale |
| 4 | Design of Tool Life Cycle Management for Effective Use of Cutting Tools | Sayalee S. Jadhav Dr. S. D. Yadav | 5,00,000.00 | Kirloskar Oil Engine, Kagal MIDC, Kolhapur |
| 5 | Design of Light Weight Seat Structure for Compact European Car | Saif A. Tamboli Dr. A. P. Shah | 55,000.00 | Statics Solution, Kothrud, Pune |
| 6 | SUPRA Vehicle | Supra Team | 80,000.00 | Various agencies |
| 7 | BAJA Vehicle | Baja Team | 1,37,500.00 | Various agencies |
| 8 | FDP on “Electric and Hybrid Electric Vehicle Technologies” | Dr. S. R. Patil, Dr. S. R. Kumbhar | 1,50,000.00 | AICTE, New Delhi under Share & Mentor 100 Scheme |
| Total | 9,97,500.00 | |||
Sponsored Research 2017-18
| Sr. No | Title of Project | PI/Co-PI | Amount (Rs.) | Funding Agency |
| 1 | Experimental investigation on Fluid Elastic instability in normal triangular finned tube arrays subjected to water cross flow | Dr. Sandeep R. Desai | 30000.00 | RIT, Sakharale |
| 2 | Design and Development of Composite Coil Spring for Automotive Suspension | R.M.Shinde | 25000.00 | RIT, Sakharale |
| 3 | Design and fabrication of regenerative brake test rig and testing on 3 – Wheeler prototype | S.T.Satpute | 30000.00 | RIT, Sakharale |
| 4 | Experimental investigation and mathematical modeling of variable stiffness magneto rheological (VSMR) damper. | L.M.Jugulkar | 30000.00 | RIT, Sakharale |
| 5 | Design and performance analysis of three – way catalytic converter (TWC) using high cell density substrate and noble metal for automotive exhaust emission control | S.T.Satpute | 25000.00 | RIT, Sakharale |
| 6 | Design and Analysis of Gas Carburetor For 4 stroke C.I. Engine Using CNGFuel. | S.D.Yadav (Rokade) | 22,000.00 | RIT, Sakharale |
| 7 | SUPRA Vehicle | Supra Team | 14900.00 | Various agencies |
| 8 | BAJA Vehicle | Baja Team | 14800.00 | Various agencies |
| 9 | Development of electric velomobile | Dr. S. R. Patil | 30,000.00 | RIT, Sakharale |
| Total | 2,21,700.00 |
Sponsored Research 2016-17
| Sr. No | Title of Project | PI/Co-PI | Amount | Funding Agency |
| 1 | Design, development and performance analysis of MR damper for four wheeled automotive applications. | L.M.Jugulkar | 80,000.00 | RIT, Sakharale |
| 2 | Development, Testing and Performance Analysis of Real Size Semi Active Shock Absorber | L.M.Jugulkar | 55,000.00 | RIT, Sakharale |
| 3 | Adjunct Professor (Dr. PravinKulkarni) | -- | 6,00,000.00 | AICTE, New Delhi |
| 4 | SUPRA Vehicle | Supra Team | 27,000.00 | Various agencies |
| Total | 7,62,000.00 |
| Sr. no. | Name of faculty | Title of proposal | Research Funding Agency | Amount in Rs. | Year |
| 1. | S.R. Desai | 'Experimental Analysis of Fluid Elastic Vibrations in Finned Tube Arrays Subjected to Single and Two Phase Cross Flow' | AICTE (RPS) | 8,25,000/- | 2011-14 |
| 2. | S.R. Patil | Synthesis and Characterization of MR fluids for Automotive MR brake application. | RIT(TEQUIP) | 1,05,000/- | 2013-14 |
| 3. | D.G.Thombare | Theoretical and Experimental Analysis of selected working fluids and its operating pressure on Sterling Engine Performance | RIT(TEQUIP) | 75,000/- | 2013-14 |
| 4. | L.M. Jugulkar | Shock Absorber Testing Machine | RIT(SEED) | 55,000/- | 2013-14 |
| 5. | S.R. Patil | Experimental Evaluation of MR brake for Automotive Application. | RIT(TEQUIP) | 1,50,000/- | 2014-15 |
Research & Publications
Publication data for international and refereed journal
Year 2017-2018
| Sr. No. | Authors Name | Paper Title | Journal Name | Volume No. | Issue No. If Any | Page Nos. | Year And Month Of Publication | H-Index | SCI Impact Factor | Non SCI Impact Factor If Any | ISSN/ISBN No./DOI | Publisher |
| 01 | Sandeep R. Desai and S. Pavitran | “The Effect of Fin Pitch on Fluid Elastic Instability of Tube Arrays Subjected to Cross Flow of Water” | Journal of The Institution of Engineers (India) : Series C (Springer Publication) | 7 | 2 | Aug 2017 (2017-18) | DOI : 10.1007/s40032-016-0332-z, | Spriger | ||||
| 02 | S.R.Kumbhar | Optimization of Leaf Spring for Strength Using Composite Material for Light Commercial Vehicle | International Journal of Advanced Production and Industrial Engineering | Special Issue | 49-54 | Oct-17 (2017-18) | | IJAPIE | ISSN: 2455–8419 | |||||
| 03 | S.R.Kumbhar | Review Method for Regasification and Dissociation Rate of Methane Hydrate | International Journal of Advanced Production and Industrial Engineering | Special Issue | 63-70 | Oct-17 (2017-18) | | IJAPIE | ISSN: 2455–8419 | |||||
| 04 | S.R.Desai | Experimental Investigation on Vortex Shedding and Fluid Elastic Instability in Finned Tube Arrays Subjected to Water Cross Flow | Journal of Pressure Vessel Technology | 139 | Oct 2017 (2017-18) | 38 | 0.7 | ISSN 15288978, 00949930 | ASME | |||
| 05 | Satyajit R Patil, S. R. Kumbhar | Curriculum development of Automobile Engineering Undergraduate program at an autonomous institute | Journal of Engineering Education and Transformation | 31(3) | 123 | January. 2018 | ISSN 2349-2473 | IUCEE | ||||
| 06 | A. P. Shah S. D. Patil | Performance, Emission and Combustion Analysis of Biodiesel Extracted from Acidic Oil: A By-product of Soybean Oil Refining Process | IIETA Journal of Modelling, Measurement and Control C | 78 | 3 | 337-350 | Apr. 2018 | IIETA | ||||
| 07 | A. P. Shah | Effect of piston bowl geometry on smoke emission for two cylinder genset engine | International Journal of Engineering Technology Science and Research | 5 | 2 | Feb. 2018 | ISSN 2394-3386 | International Journal of Engineering, Technology, Science and Research | ||||
| 08 | S.D.Yadav | Design of Trailer Structure for 12 TON Payload Using Advanced Light weight Material for Weight Reduction | Journal NX- | - | - | April 2018 | ISSN-2581-4230 | Novateur Publications | ||||
| 09 | S.D.Yadav | A Review On Body In White Solution For Improving Ligthweight Automotive Structure | International Journal of Advance Research in Science and Engineering | 7 | 4 | April 2018 | ISSN-2319-8354 | A R Research publication, New Delhi | ||||
| 10 | S.D.Yadav | A Review on Homogeneous Charges Compression Ignition Engine For Elimination of Limitations | International Journal of Computer Engineering and Application | 12 | Special issue | March 2018 | ISSN-2321-3469 | A R Research publication, New Delhi | ||||
| 11 | S.D.Yadav | A Finite Element Analysis of Diesel Engine Test Bed Using Different Material For Reducing Diesel Engine Bed Vibrations | International Journal of Computer Engineering and Application | 12 | Special issue | March 2018 | ISSN-2321-3469 | A R Research publication, New Delhi | ||||
| 12 | S.D.Yadav | Emission Control System:DOC,DPF,SCR &EGR | International Journal of Computer Engineering and Application | 12 | Special issue | March 2018 | ISSN-2321-3469 | A R Research publication, New Delhi | ||||
| 13 | S.D.Yadav | A Review on Performance and Emission Characteristics of Hydrogen Enriched Compressed Natural Gas Engine | International Research Journal of Engineering and Technology | 5 | 4 | April 2018 | ISSN-2395-0072 | A R Research publication, New Delhi | ||||
| 14 | S.R.Patil | Experimental Studies on Magnetorheological Brake for Automotive Application | International Journal of Automotive and Mechanical Engineering | 15 | 1 | 4893-4908 | March 2018 | 19 | 21801606 | The Automotive Engineering Centre (AEC), Universiti Malaysia Pahang | ||
| 15 | S.R.Patil | Simulation-based estimation of an automotive magnetorheological brake system performance | Journal of Advanced Research | 14 | 1 | 43-51 | May 2018 | 28 | 2090-1232 | Cairo University |
Year 2016-2017
| Sr. No. | Authors Name | Paper Title | Journal Name | Volume No. | Issue No. If Any | Page Nos. | Year And Month Of Publication | H-Index | SCI Impact Factor | Non SCI Impact Factor If Any | ISSN/ISBN No./DOI | Publisher |
| 01 | Nitin Satpute L.M.Jugulkar |
Hybrid Electromagnetic Shock Absorber for Energy harvesting in a Vehicle Suspension | Journal of Mechanical Engineering Science |
- | - | 1-18 | 2016 | 40 | DOI: 10.1177/0954406216663577 | SAGE | ||
| 02 | L.M.Jugulkar | Mathematical modelling and experimental validation of mono-tube shock absorber | World Journal of Engineering | 13 | 4 | 294-299 | 2016 | 2 | DOI 10.1108/WJE-08-2016-040 | Emerald Insight | ||
| 03 | S.D.Yadav | Design of Bevel Gear Pair for Gate Valve | International Journal of Research in Engineering Technology | 5 | 12 | 114-120 | Dec 2016 | pISSN-2321-7308 | e-SAT Publication | |||
| 04 | S.D.Yadav | Methane Hydrate Gas Storage System for Automobiles. | International Journal of Renewable Energy Research | 7 | 1 | 449-466 | Jan 2017 | 15 | ISSN 13090127 | International Journal of Renewable Energy Research Publication | ||
| 05 | A.P. Shah | Modelling and Analysis of High Thermal Conductivity Heat Pipe Thermal Ground Planes | International Journal of Scientific Development and Research | 1 | 10 | 87 | Oct 2016 | ISSN-2455-2631 | International Journal of Scientific Development and Research Publication | |||
| 06 | P.S.Ghatage, A.P. Shah | CFD Analysis of Heat Transfer Enhancement in pipe flow using Nanofluid. | International Advanced Research Journal in Science Engineering and Technology | 4 | 1 | 7 | Jan 2017 | Chennai: International advanced research journal in science, engineering and technology | ||||
| 07 | S.T.Satpute | A Review on Properties of Catalyst Materials for a Three Way Catalytic Converter | International Journal of Advanced Production and Industrial Engineering | 0 | 22-26 | 2017 | ISSN: 2455–8419 | Ms. Indira, Indira Technologies | ||||
| 08 | D.G.Thombare | ‘Modelling and Simulation of Methanol and Diesel Fuelled HCCI Engine for Improved Performance and Emission Characteristics | International Journal of Science and Research | 5 | 6 | 112-115 | Jun-16 | , ISSN (Online): 2319-7064 | International Journal of Science and Research Publication | |||
| 09 | D.G.Thombare | ‘The importance and need of Universal Human Values in Engineering Student's Life’ | The Compass’ | 10 | 1 | 102-105 | 17-Nov | SAGE | ||||
| 10 | S.R.Patil | Adopting MOOC Based Approach for ‘Self- Learning’ of Students. | Journal of Engineering Education Transformation | 30 | 3 | January 2017 | ISSN-2349-2473 | IUCEE | ||||
| 11 | S.R.Desai, S.R.Patil | Design and Execution of Strategies for Effective Implementation of Outcomes Based Education in Engineering Education | Journal of Engineering Education Transformations | 30 | 01 | 2016 | ISSN-2349-2473 | IUCEE |
Year 2015-2016
| Sr. No. | Authors Name | Paper Title | Journal Name | Volume No. | Issue No. If Any | Page Nos. | Year And Month Of Publication | H-Index | SCI Impact Factor | Non SCI Impact Factor If Any | ISSN/ISBN No./DOI |
| 01 | Mr. Satyajit R. Patil |
Thermal Analysis of Magnetorheological Brake For Automotive Application | Applied Thermal Engineering |
98 | - | 238-245 | 2015 | 112 | 2.74 | 10.1016/j.applthermaleng.2015.11.128 | |
| 02 | Sandeep R. Desai and S. Pavitran | Theoretical Analysis of Fluid Elastic Vibrations of Finned Tube Arrays Subjected to Cross Flow of Water | Journal of Vibration Engineering and Technologies | 4 | 1 | 21-29 | February 2016 | 9 | 0.584 | ISSN 2321-3558 | |
| 03 | Mr. Satyajit R. Patil |
Laboratory Development Through Final Year Projects- An Approach | Journal of Engineering, Science and Management and Engineering Education | 8 | 1 | 33-36 | 2016 | ISSN 0976-0121 | |||
| 04 | L.M.Jugulkar | “Analysis of suspension with variable stiffness and variable damping force for automotive applications” DOI: 10.1177/1687814016648638 | Advances in Mechanical Engineering | 8 | 5 | 1-19 | April 2016 | 0.5 | 0.7 | 1687814016648638 | |
| 05 | S.R.Kumbhar | Comparative Dynamic Mechanical Analysis Study of Rubber and Magnetorheological Elastomer | International Journal of Applied Engineering Research (IJAER), RIP Publication, | 10 | - | 531-534 | November 2015 | (Scopus Index)0.5 | 0973-4562 | ||
| 06 | L.M.Jugulkar | Fluid flow modeling and experimental investigation on automobile damper(http://dx.doi.org/10.1016/j.conbuildmat.2016.05.142 | Construction and Building Materials | 121 | - | 760-772 | May 2016 | 81 | 2.29 | 0950-0618 | |
| 07 | Suresh M Sawant Bhau K Kumbhar, Satyajit R Patil | A Comparative Study on Automotive Brake Testing Standards | J. Inst. Eng. India Ser. C | - | - | 5 | May 2016 | 10 | 00203408/DOI 10.1007/s40032-016-0289-y |
Year 2014-2015
| Sr. No. | Authors Name | Paper Title | Journal Name | Volume No. | Issue No. If Any | Page Nos. | Year And Month Of Publication | H-Index | SCI Impact Factor | Non SCI Impact Factor If Any | ISSN/ISBN No./DOI |
| 01 | S. R. Kumbhar, Subhasis Maji, Bimlesh Kumar | Comparative Study Of Magneto-Rheological Elastomeric And Rubber Bushings | Technical Journal Of The Institution Of Engineers (India) | 38 | 275-278 | 18 – 19 October, 2014 | ISBN No. 978-81-924990-2-4 | ||||
| 02 | L.M.Jugulkar Dr. Shankar Singh Dr. S.M.Sawant | Development And Manufacturing Of Variable Stiffness Suspension System For Automotive Application | International Journal Of Research In Mechanical Engineering & Technology | 2 | 2(2) | 52 | October 2014 | ISSN: 2249- 5762 (Online) ISSN: 2249-5770 (Print) | |||
| 03 | D.G.Thombare | Personality Mapping Of Entry Level Engineering Students For Assessment Of Engineering Competencies DOI: 10.16920/ijerit/2015/v28i2&3/56667 | Journal Of Engineering Education Transformations JEET | 28 | 2 | 105 | Oct. 2014 & Jan. 2015 | ISSN 2349-2473 | |||
| 04 | D.G.Thombare | Experimental Investigation Of Effect Of Lubricant Viscosity On Vibrations Of Plain Hydrodynamic Journal Bearing System | International Journal For Research & Development In Technology | 3 | 4 | 31-36 | April 2015 | ISSN (O) :- 2349-3585 | |||
| 05 | Nikhil A .Bhilare Satyajit R.Patil | Design Of Antilock Brake System For A BAJA Vehicle | Journal Of Basic And Applied Engineering Research (JBAER) | 2 | 6 | 443 -446 | April 2015 | Print ISSN: 2350 – 0077 Online ISSN: 2350 - 0255 | |||
| 06 | M. M. Bagwan, S. T. Satpute | Theoretical Design Of Exhaust Gas Recirculation System In Compression Ignition Engine | Journal Of Basic And Applied Engineering Research, | 2 | - | 464-470 | April 2015 | ISSN: 2350-0077 | |||
| 07 | T. B. Jawalkar, P. A. Shirke, S. T. Satpute | Tensile Test And FEA Correlation Of ABS Polymer | Journal Of Material Science And Mechanical Engineering (JMSME) | 2 | - | 394-397 | April 2015 | ISSN: 2393-9095 | |||
| 08 | S. R. Kumbhar, Subhasis Maji, Bimlesh Kumar, | Comparative Dynamic Mechanical Analysis Study Of Rubber And Magneto rheological Elastomer | International Journal Of Applied Engineering Research (IJAER), RIP Publication | 10 | - | 531-534 | 2015 | 13 | ISSN No. 0973-4562 | ||
| 09 | Bhau K.Kumbhar Satyajit R.Patil Suresh M.Sawant | Synthesis And Characterization Of Magneto-Rheological (MR) Fluids For MR Brake Application | Science Direct Engineering Science And Technology, An International Journal | - | - | 1-7 | 2015 | 1.5 | Doi : 10.1016 |
Publication data for national and referred journal
Year 2016-17
| Sr. No. | Authors Name | Paper Title | Journal Name | Volume No. | Issue No. IfAny | Page Nos. | Year And Month Of Publication | H-Index | SCI Impact Factor | Non SCI Impact Factor If Any | ISSN/ISBN No. |
| 01 | S.R.Patil | Adopting MOOC Based Approach for ‘Self- Learning’ of Students. | Journal of Engineering Education Transformation | 30 | 3 | January 2017 | ISSN-2349-2473 |
Year 2015-16
| Sr. No. | Authors Name | Paper Title | Journal Name | Volume No. | Issue No. If Any | Page Nos. | Year And Month Of Publication | H-Index | SCI Impact Factor | Non SCI Impact Factor If Any | ISSN/ISBN No. |
| 01 | Indrajeet R.Madane L.M. Jugulkar | Changing Stiffness Shock Absorber For Automotive Application | Journal Of Basic And applied Engineering Research | 2 | 439-442 | April June 2015 | L | Print ISSN: 2350-0077 | |||
| 02 | S.R. Desai. S.R.Patil. | Design and Execution of stratergies for effective implementation of outcomes based education in Engineering Education. | Journal of Engineering Education Transformations | - | - | 111-117 | February 2016 | - | - | 2394-1707 |
Year 2014-15
| Sr. No. | Authors Name | Paper Title | Journal Name | Volume No. | Issue No. If Any | Page Nos. | Year And Month Of Publication | H-Index | SCI Impact Factor | Non SCI Impact Factor If Any | ISSN/ISBN No. |
| 01 | B.P.Narayankar S.R.Kumbhar Vivek Dafale | Design And Development Of Bus Body Structure: A Critical Review | Trends In Mechanical Engineering &Technology | Vol .4 | 25-30 | 2014 | L | ISSN: 2231-1793 |
Publication data for international conference papers Year 2017-18
| Sr. No. | Authors Name | Paper Title | Conference Name | Page Nos. If Any | Year And Month Of Publication |
| 1 | R.M.Shinde | Buckling Analysis of Connecting Rod | Second national Finite Element developers Meet | - | December 2017 |
| 2 | S.R.Patil | Curriculum Development of Automobile Engineering Undergraduate Program at an Autonomous Institute | Fifth International Conference on Transformations in Engineering Education (ICTIEE-2018), Thiagarajar College of Engineering, Madurai, Tamilnadu, INDIA, 8th – 9th January 2018. | January 2018 | |
| 3 | S.R.Kumbhar | Undergraduate Research Experience (URE): A New Dimension in Curricular Redesign | Fifth International Conference on Transformations in Engineering Education (ICTIEE-2018), Thiagarajar College of Engineering, Madurai, Tamilnadu, INDIA, 8th – 9th January 2018. | January 2018 | |
| 4 | L.M.Jugulkar | Design of Regenarative BrakeTest Rig | International Journal of Mechanical and Product Engineering, IRAJ Research Forum, 15th April 2018, Pune. | 34 - 38 | April, 2018 |
| 5 | A.P.Shah P.S.Ghatage | Preparation and Characterization of Biodiesel Extracted from Acidic Oil: a By-product of Soybean oil Refining Process | 6th INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESEARCH (ICAER) 2017 | Dec, 2017 |
Year 2016-17
| Sr. No. | Authors Name | Paper Title | Conference Name | Page Nos.If Any | Year And Month Of Publication |
| 01 | P.S. Ghatage | Strengthening Industry Institute Interaction (III) for improvement in campus placement and industry Tie-up of Automobile Engineering Department in RIT: A Quality Circle Approach | International Conference on Transformation in Engineering Education | - | January 2017 |
| 02 | S.R.Patil | Adopting MOOC Based Approach for ‘Self- Learning’ of Students. | International Conference on Transformation in Engineering Education | - | January 2017 |
| 03 | R.M.Shinde | Design and Analysis of various Piston Geometries for single cylinder VCR Diesel Engine. | International Conference on Modern era Research in Mechanical Engineering | - | September 2016 |
| 04 | A.P.Shah | Computational Modeling for High Thermal Conductivity Heat Pipe Thermal Ground Planes. | International Conference on Modern era Research in Mechanical Engineering | September 2016 | |
| 05 | S.R.Patil | Experimental Evaluation of Magneto rheological Brake for Automotive Application | ISME conference ,NIT, Warangal. | February 2017 | |
| 06 | S.R.Patil | Simulation for estimation of Magnetorheological Brake Torque Based on Fuzzy Logic Singular Value Decomposition Using MATLAB | ISME conference ,NIT, Warangal. | February 2017 | |
| 07 | S.R. Kumbhar | Review Method for Regasification and Dissociation Rate of Methane Hydrate | International Conference on Advanced Production and Industrial Engineering (ICAPIE 2016) | 9-10 December, 2016 | |
| 08 | S.R. Kumbhar | Optimization of leaf spring for strength using composite material for light commercial vehicle | International Conference on Advanced Production and Industrial Engineering (ICAPIE 2016) | 9-10 December, 2016 | |
| 09 | S.D.Yadav | Design of Y shape gas carburetor for homogeneous Mixture | International Conference on Trends in Electronics and Informatics,ICEI 2017 | Pp 590-593 | May 2017 |
| 10 | S.D.Yadav | Mathematical modeling of bevel gear for gate valve application | International Conference on Trends in Electronics and Informatics,ICEI 2017 | Pp 215-219 | May 2017 |
Year 2015-16
| Sr. No. | Authors Name | Paper Title | Conference Name | Page Nos.If Any | Year And Month Of Publication |
| 01 | Sandeep R. Desai, S. Pavitran | Experimental Analysis Of Fluid Elastic Vibrations Of Finned Tube Arrays Subjected To Water Cross Flow | 12th International Conference On Vibration Problems (ICOVP) held at IIT, Guwahati | - | December 14-17, 2015(2015-16) |
| 02 | R.M.Shinde | Design of Carbon/ Epoxy Composite DriveShaft for Low Passanger Cars. | International Conference on Design, Manufacturing and Mechatronics. | - | Feb. 19-20-2016 |
| 03 | Sandeep R. Desai and Satyajit R. Patil, | Design and execution of strategies for effective implementation of Outcomes Based Education (OBE) in Engineering | International Conference on Transformations in Engineering Education (ICTIEE), held at COE, Pune | - | January 08-12, 2016 |
| 04 | Dr. S.D.Yadav Dr. Sushama Kulkarni | Utilization of Biogas Fuel Generated using Food waste as a Renewable Energy Source | International Conference on Advances in Science, Management and Engineering | - | December 2015 |
| 05 | Dr. S.D. Yadav | Therotical Prediction of Diesel- Biodiesel DEE Blend as a Fuel for C.I. Engine with Required Modifications for Optimum Performance. | ISTE, International Conference on Energy Systems and Developments (ICESD 2016) Pune. | - | 19-20February 2016 |
| 06 | Dr. S.D.Yadav | Art of Review On Stair Climbing Mobile Vehicle Revolution | International Conference on Advances in Science, Management and Engineering | - | December 2015 |
| 07 | Dr. S.D.Yadav, P.S. Ghatage | PO Assessment For Post Graduate Automobile Engineering Program at RIT, Rajaramnagar, An Autonomous Institute. | 45th ISTE Annual Convocation | - | 2015 |
| 08 | Dr.A.P.Shah | Interaction of Radiation with Conjugate Mixed Convection From A Discretely and Non-Identically Heated Vertical Channel. | International Conference on Recent Trends in Engineering and material Sciences(ICEMS-2016), Jaypur National University Jaypur. | - | 17-19 March 2016 |
| 09 | S.T Satpute | Theoretical Assessment and Mathematical Modeling for Turbo Lag Reduction In C.I.Engine | 2nd International Conference on Mechanical Engineering ,Material Science and mechatronics(NCMMM-16),VIIT,Pune. | - | 19 March 2016 |
| 10 | S.T Satpute | Design of Automotive Muffler and Validation of 1-D Linear Approach for Prediction of Transmission Mass for Muffler Parts | Automotive Noise and Vibration Conference,ARAI,Pune | - | 27-28 January 2016 |
| 11 | S.T Satpute | Study of The Most Significant Parameters for Friction in Piston Rings of Automotive I.C.Engine. | RGI-TRPCS-16(Raisoni Group of Institution Technical Research Paper Compitition For Students. | - | 10th March 2016 |
| 12 | Satyajit Patil, Pradip Patil, Sanjay Kumbha | Self Learning Based Modular Course (SLMC) – A Novel Approach towards enhancing self learning ability of students | Third International Conference on Transformations in Engineering Education (ICTIEE 2016), organized at College of Engineering, Pune | - | 8-12 Jan 2016 |
| 13 | D.G.Thombare | Thermo-fluidic Performance Evaluation of Heater of Stirling Engine to Generate Power from Waste’ | 8th International Conference on Applied Energy | Dec-16 |
Year 2014-2015
| Sr. No. | Authors Name | Paper Title | Conference Name | Page Nos.If Any | Year And Month Of Publication |
| 01 | Bhau Kumbhar Satyajit R.Patil | A Study On Properties and Selection Criteria For Magneto Rheological (MR) Fluid Components | International Conference On Materials And Characterization Techniques Defense Science Journal | 408 | 12 March |
| 02 | Satyajit R. Patil Suresh M. Sawant | Reliability analysis of automotive magnetorheological brake: a qualitative approach (esda2014-20135) | Proceedings of the ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis ESDA2014 Copenhagen, Denmark | June 25-27, 2014, | |
| 03 | S. D. Kelkar, S. R. Kumbhar | Dynamic Characteristics Of Magneto rheological Elastomer Isolator | 4th International Conference On “Advance Trend In Engineering, Technology And Research | 288-291 | 19-20 June 2015 |
| 04 | Dr. A. C. Attar, S. R. Kumbhar | Project Based Learning – An Integrated Approach For Outcomes Based Learning | 2nd International Conference On Transformations In Engineering Education | 783-787 | 2015 |
| 05 | Shital M. Kalikate Satyajit R.Patil, Suresh. M.Sawant | Design And Simulation Of Magneto – Rheological (MR) Brake For Automotive Application | SAE International Conference On Automotive Materials &Manufacturing 2014 | 2014 | |
| 06 | Abhijeet, P., Shah, and Gururaja Rao, C., | Simulation Studies on Conjugate Mixed Convection with Radiation from a Vertical Channel with Multiple Non-Identical Discrete Heat Sources | Advances in Mechanical, Material, Manufacturing, Automobile, Aeronautical Engineering and Applied Physics | 2014 | |
| 07 | Abhijeet, P., Shah, and Gururaja Rao, C | Effect of Radiation on Fluid Flow and Heat Transfer from a Vertical Channel with Multiple Non-Identical Discrete Heat Sources | Sixth International Conference on Theoretical, Applied, Computational and Experimental Mechanics, 6th ICTACEM, 2014 | 2014 | |
| 08 | N.Senthilnathan G.Venkatachalam Nilesh N. Satonkar | A Two Stage Finite Element Analysis Of Electromagnetic Forming Of Perforated Aluminum Sheet MetalsDOI: 10.1016/j.proeng.2014.12.392 | Science Direct 12th Global Congress On Manufacturing And Management, GCMM 2014 ELSVIER | 1135 - 1144 | 2014 |
Publication data for national Conference
Year 2017-18
| Sr. No. | Authors Name | Paper Title | Conference Name | Page Nos.If Any | Year And Month Of Publication |
| 1 | A. P. Shah | Numerical Analysis of Drag on Blunt bodies with the use of different conical spikes with supersonic speed | 4th National Conference for Post Graduate Students (RIT NCon PG-18) | April, 2018 | |
| 2 | A. P. Shah | Effect of Fuel Injection System on Smoke Emission for two Cylinder Genset Engine | 4th National Conference for Post Graduate Students (RIT NCon PG-18) | April, 2018 | |
| 3 | A. P. Shah | Numerical Analysis on thermal energy storage tank filled with phase change material | 4th National Conference for Post Graduate Students (RIT NCon PG-18) | April, 2018 | |
| 4 | S.R. Kumbhar | Experimental investigation of single cylinder BSIV diesel engine emission improvement | 4th RIT National Conference for Engineering Post Graduate Students, (RIT NConPG-18), 13th April 2018 | April 2018 | |
| 5 | S.T. Satpute | Selection of Catalyst material for Catalytic converter using Wieghted property Index Method. | 4th RIT National Conference for Engineering Post Graduate Students, (RIT NConPG-18), 13th April 2018 | April 2018 | |
| 6 | S.R.Patil | Design,Modeling and Testing of Radiator For Automotive 400cc SI ingine. | 4th RIT National Conference for Engineering Post Graduate Students, (RIT NConPG-18), 13th April 2018 | April 2018 | |
| 7 | R.M.Shinde | Comparision of Weights of Steel and Composite Coil Spring for Two Wheeler Suspension System. | 4th RIT National Conference for Engineering Post Graduate Students, (RIT NConPG-18), 13th April 2018 | April 2018 | |
| 8 | S.R.Desai | Emission Optimization of 60 HP Agricultural Tractor Engine | 4th RIT National Conference for Engineering Post Graduate Students, (RIT NConPG-18), 13th April 2018 | April 2018 | |
| 9 | L.M.Jugulkar | Mathematical Modeling of Variable Stiffness & Damping (VSD) Suspension System Using Magnetorheological Damper for Automotive Application. | 4th RIT National Conference for Engineering Post Graduate Students, (RIT NConPG-18), 13th April 2018 | April 2018 | |
| 10 | D.G.Thombare | Development and Implementation of Data Logger and Control Strategy for Automatic Gear Shift Control for Four Wheeler. | 4th RIT National Conference for Engineering Post Graduate Students, (RIT NConPG-18), 13th April 2018 | April 2018 |
Year 2016-17
| Sr. No. | Authors Name | Paper Title | Conference Name | Page Nos. If Any | Year And Month Of Publication |
| 01 | D.G.Thombare | Design and Development of an ECU with Open Loop Feed back System for Homogeneous charge Compression Ignition(HCCI) Engine | National Conference on Innovation in Mechanical Engineering,SIT,Lonavala | - | April 2017 |
| 02 | A.P.Shah | Mathematical Modeling and Design of Warm and Warm gear Pair for Determining the Surface Stress Acting on the tooth of Worm and Worm Gear for Plug Valve Application | National Conference on Innovation in Mechanical Engineering,SIT,Lonavala | - | April 2017 |
| 03 | P.S. Ghatage | Learning Centric Approach Through Various Class Room Activities for Better Learning | National Conference on Innovation in Engineering and management Education. | April 2017 | |
| 04 | D.G.Thombare | Effect of Geometry of Secondary Pipe of Intake System on Multi Cylinder Diesel Engines Volumetric Efficiency | 3rd RIT Post Graduate Conference | April 2017 | |
| 05 | D.G.Thombare | Municipal Solid Waste Management for Smart Indian Cities | 3rd RIT Post Graduate Conference | April 2017 | |
| 06 | S.R.Patil | Simulation of Automotive Magnetorheological Brake for Antilock Brake System. | 3rd RIT Post Graduate Conference | April 2017 | |
| 07 | S.R.Patil | Experimental Evaluation of Temperature Rise in Dry Automotive Clutch at Constant Slip Rate | 3rd RIT Post Graduate Conference | April 2017 | |
| 08 | S.R. Kumbhar | NAAC – Quality Benchmarking in Technical Institutions | National Conference on “Innovations in Engineering and Management Education” (NCIEME -2016) | ISBN: 978-81-931546-3-2 (pp. 157-161) | 8-9 December, 2016 |
| 09 | S.D.Yadav | Design of Reactor for Artificial Methane Hydrate Formation | 3rd RIT Post Graduate Conference | pp-40-45 | April 2017 |
| 10 | R.M.Shinde | Design and Optimization of Glass/Epoxy driveshaft for passenger Vehicle | 3rd RIT Post Graduate Conference | April 2017 |
Publication data for Books
| Sr. No. | Authors Name | Title Of The Book | Publisher Name | ISSN/ISBN | Year And Month Of Publication |
| 01 | S.R. Kumbhar | Applied Thermodynamics | Electrotech Publication,1st Edition. | ISBN No. 978-93-83752-43-0 | September 2016 |
| 02 | S.R.patil | Mechanical Engineering for Sustainable Development. | Experimental Evaluation of Magnetorheological Brake for Automotive Application. | ISBN No. 978-17-71886819 | 2017-18( chapter in book) |